Seacoast Mazda Sway Bars

The sway bars or torsion springs on Mazda automobiles affect the spring rate on the suspension on rough roads and during cornering. If you want to improve your Mazda vehicle's overall handling, you can have the experts at Seacoast Mazda add aftermarket sway bars or anti-roll bars. Aftermarket Mazda sway bars are usually a lot thicker than the ones that are original to your Mazda automobile. The service department at Seacoast Mazda has the sway bar links, bushings, and all the other components that are needed to properly install the sway bars. Plus, their service technicians have the special training, years of experience, and expertise to do the job right.

The Role Of Sway Bars

Called anti-sway bars, anti-roll bars, or stabilizer bars, sway bars help to prevent the body of an automobile from leaning too much to one or the other. But to make sure it is functioning properly, the bushings and links should be checked and serviced regularly. If the sway bars are loose or if they have any play, then they should be replaced. It is unusual for the sway bar itself to get damaged. It is the bushings and the links that tend to get worn and need to be replaced. In some cases, the sway bar links and bushings may need to be replaced every 60,000 miles. Stop in and have the professionals at Seacoast Mazda assess them for you.

Designed To Twist

The sway bars in your Mazda are designed to twist. Its rubber bushings are fitted between it and the control arms. Both the brackets as well as the bushings play a very important role in helping to secure the connection between the sway bar and the control arms or to connect the sway bar to the control arm and connect the end links to the strut. Over time and with regular use the twisting of the sway bar can cause the links, bushings, brackets, and other components to begin to wear down. That's why it is very important to take your vehicle to Seacoast Mazda to have the sway bar components checked periodically.

Signs Of Damaged Sway Bar Components

There are several ways to tell if the sway bar components are worn or damaged. Some of the most common signs that your vehicle has bad sway bar bushings or that your sway bar links are going bad include:

1. The vehicle feels unstable when driving
2. Clunking or rattling noises
3. A knocking sound when driving on uneven roadways
4. Hearing noise when you go over speed bumps
5. Your vehicle has poor handling when turning

While it is possible to drive your vehicle with worn or damaged sway bar end links, it is unsafe. The vehicle will begin to experience excessive body roll when turning at speeds of over 30 mph. As a result, the vehicle will become unstable. Should you see your vehicle exhibiting any of these problems, head to Seacoast Mazda right away.

Pay Close Attention

It is important to take your vehicle to Seacoast Mazda once or twice a year to have its sway bar components checked. The average person may not notice the early warning signs of sway bar component problems if they're mostly driving on local roads at a relatively slow speed. It may only become clear that there is a problem when you are driving at highway speed. At that point, you may begin to notice excessive body roll. At that point, you should slow down, drive carefully and exit the highway. Continuing to drive at a very high speed with damaged sway bar components can compromise your safety and that of the drivers around you.

How Seacoast Mazda Can Help

When you take your vehicle to Seacoast Mazda to have the sway bar and its components checked, they will determine the source of the noises you heard. This will make sure the noise is not from somewhere else in the suspension system. They will inspect the sway bar bushings to make sure none of them are torn. They will also manipulate the sway bar to see if it moves. If it does, it could mean the bushing or the sway bar link is damaged. Once they identify the source of the problem, they will replace the bushing and/or the sway bar link or any other sway bar components that are worn or damaged.

Excellent And Affordable Service

A growing number of people take their vehicles to Seacoast Mazda when they need to have their sway bar serviced because they provide excellent service at affordable prices. If you want your vehicle quality sway bar service at a price that can easily fit into your budget, you want Seacoast Mazda. They have well-trained, experienced service technicians who have the expertise to work on any year or model automobile. If you want to make sure the sway bars on your automobile are properly serviced and you don't want to overpay, all you have to do is take your vehicle to Seacoast Mazda today.

The Right Equipment, Tools, And Technology

It is no accident that the team at Seacoast Mazda has earned a reputation for providing quality sway bar service. They consistently invest in the right equipment, tools, and technology each year. This is paired with expert, experienced service technicians. This enables Seacoast Mazda to deliver quality sway bar component service. This is important to make it safe to drive your automobile. Don't settle for taking your vehicle to a shop with outdated tools, equipment, and technology. That can put the health and safety of you and your loved ones at risk. Let Seacoast Mazda help keep your vehicle safer.

Schedule A Visit Today

You don't have to wait until your vehicle's sway bar components start making noise and your vehicle starts experiencing excessive body roll to take your vehicle to Seacoast Mazda. Call them today and schedule a visit. This can let you know the condition of the sway bar components and make all necessary repairs.